OEM Restraints System Part Replacement Search

2009 Hyundai Veracruz

Print

DISABLE PROCEDURE AND TIME (Always Check Service Manual)

Before doing any SRS repairs, use the Hi-Scan Pro to check for DTCs. Refer to the Diagnostic Trouble Code list
for repairing of the related DTCs.

1. Turn ignition switch to OFF
2. Disconnect the negative cable from the battery
3. Wait at least 3 minutes

Before removing any of the SRS parts (including the disconnection of the connectors), always disconnect the
SRS connector.

REV: 04/2011

PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT

When the front airbag(s) deployed after a collision, replace the following items:
• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG,STEERING WHEEL; AIRBAG,INSTRUMENT PNL]
• Deployed seat belt pretensioner(s)
• Front impact sensors [AIRBAG SENSOR,FENDER]
• SRS wiring harnesses

When the seat belt pretensioner(s) deployed after a collision, replace the following items:
• Deployed Seat belt pretensioner(s)
• SRSCM [MODULE,AIRBAG CONTROL]
• Front impact sensors [AIRBAG SENSOR,FENDER]
• SRS wiring harness

When the side/curtain airbag(s) deployed after a collision, replace the following items.
• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG & SEAT BACK ASSY; AIRBAG,ROOF]
• Side impact sensor(s) for the deployed side(s) [AIRBAG SENSOR,SIDE]
• SRS wiring harness
• When the side airbag deployed after a collision, replace the seatback as an assembly [AIRBAG & SEAT BACK ASSY]

PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED

• When the front airbag(s) deployed after a collision. Inspect the clock spring for heat damage. If any damage found, replace the clock spring
• If the crash pad is damaged when the Passenger Airbag (PAB) is deployed, replace the damaged crash pad and Passenger Airbag (PAB) together

Additional Information