OEM Restraints System Part Replacement Search
2008 Kia Sedona
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
1. Turn the ignition switch OFF2. Disconnect the negative cable from the battery
3. Wait at least three minutes before beginning work
REV: 09/2013
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
When the front airbag(s) deployed after a collision, replace the following items:• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG,STEERING WHEEL; AIRBAG,INSTRUMENT PNL]
• Seat belt pretensioner(s)
• Front impact sensors [AIRBAG SENSOR,FRONT]
• SRS wiring harnesses
• Replace the crash pad which is damaged when Passenger Airbag (PAB) is deployed
When the seat belt pretensioner(s) deployed after a collision, replace the following items:
• Seat belt pretensioner(s)
• SRSCM (if B1658 detected) [MODULE,AIRBAG CONTROL]
• Front impact sensors [AIRBAG SENSOR,FRONT]
• SRS wiring harnesses
When the side/curtain airbag(s) deployed after a collision, replace the following items:
• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG & SEAT BACK ASSY; AIRBAG,ROOF]
• Side impact sensor(s) for the deployed side(s) [AIRBAG SENSOR,SIDE; AIRBAG SENSOR,QTR PANEL]
• SRS wiring harnesses
• When the side airbag deployed after a collision, replace the seatback as an assembly [AIRBAG & SEAT BACK ASSY]
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
Before doing any SRS repairs, use the Hi-Scan Pro to check for DTCs. Refer to the Diagnostic Trouble Code list for repairing of the related DTCs• Inspect the clock spring for heat damage. If any damage found, replace the clock spring
• Steering wheel
• WCS reset and accuracy check should be performed if the vehicle is brought to the repair shop due to an accident or a crash
| Additional Information |