OEM Restraints System Part Replacement Search
2007 Kia Optima/Magentis (Model Year 2006.5)
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
1. Turn ignition switch OFF2. Disconnect the negative
cable from the battery
3. Wait at least 3 minutes before beginning work
Before removing any of the SRS parts (including the disconnection of the connectors), always disconnect the
SRS connector
REV: 09/2019
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
When the front airbag(s) deployed after a collision, replace the following items.• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG,STEERING WHEEL; AIRBAG,INSTRUMENT PNL]
• Seat belt pretensioner(s)
• Front impact sensors [AIRBAG SENSOR,FRONT]
• Replace the damaged crash pad with Passenger Airbag (PAB) when the Passenger Airbag (PAB) is deployed
• Any damaged airbag system part
When the seat belt pretensioner(s) deployed after a collision, replace the following items.
• Seat belt pretensioner(s)
• SRSCM (if B1658 detected) [MODULE,AIRBAG CONTROL]
• Front impact sensors [AIRBAG SENSOR,FRONT]
• Any damaged airbag system part
When the side/curtain airbag(s) deployed after a collision, replace the following items.
• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG & SEAT BACK ASSY; AIRBAG,ROOF]
• Side impact sensor(s) for the deployed side(s) [AIRBAG SENSOR,SIDE]
• Any damaged airbag system part
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
• Before doing any SRS repairs, use the Hi-Scan Pro to check for DTCs. Refer to the Diagnostic Trouble Code list for repairing of the related DTCs.• Steering wheel
• Inspect the clock spring for heat damage. If any damage found, replace the clock spring.
• Any damaged airbag system part
| Additional Information |