OEM Restraints System Part Replacement Search
2024 BMW X7
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
-Inspection, testing and installation work may only be carried out by expert trained personnel in BMW service.-Work on airbag system components must only ever be carried out with a disconnected vehicle battery, covered negative terminal and disconnected plug connection of the cable leading to the gas generator. If only the battery is disconnected, the following prescribed waiting period must be observed without fail:
1 mins
• When carrying out straightening and welding work with an electric welder:
• Disconnect battery
• Cover negative terminal (post)
REV: 08/2024
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
Replace following components after airbag deployment:Deployed Seat airbag [if deployed]:
• Replace airbag module [AIRBAG,FRONT SEAT]
• Replace airbag module and seat cover with upholstery
• Active head restraint. The gas generator can be replaced up to 5 times. (if equipped)
Deployed Driver's airbag [if deployed]:
• Driver's airbag [AIRBAG,STEERING WHEEL]
• Replace steering wheel
Deployed Front passenger airbag [if deployed]:
• Front passenger airbag [AIRBAG,INSTRUMENT PNL]
Deployed Head airbag [if deployed]:
• Head airbag [AIRBAG,ROOF]
Knee airbag [if deployed]:
• [ AIRBAG,KNEE BOLSTER]
Check components for damage, replace if necessary
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
Check and/or replace following components after airbag deployment:• Sensor B-pillar (left/right) [AIRBAG SENSOR,SIDE]
• Sensor front door (left/right)[AIRBAG SENSOR,FRT DOOR]
• Sensor seat, Driver-/passenger's side[AIRBAG SENSOR,SEAT TRACK]
• Airbag control unit, vehicle interior [MODULE, AIRBAG CONTROL]
• Sensor, pedestrian protection
• Front sensor (engine compartment) [AIRBAG SENSOR,FRONT]
Cables and connectors:
• Check cables and plugs for damage, replace if necessary
Seat belt system:
•Electrically motorized reel
•Seat belt tensioner
•Seat belt height adjustment
•end fitting pretensioner
•seat belt buckle
Seats:
• Seats
• Airbag module [AIRBAG,FRONT SEAT]
• Active head restraint
Driver's airbag:
• Airbag module [AIRBAG,STEERING WHEEL]
• Steering Wheel
• Steering column (if damaged)
Front passenger airbag:
• Airbag module [AIRBAG,INSTRUMENT PNL]
• Dashboard trim panel (must be replaced!)
• Supporting tube (if damaged)
Side airbag, front/rear:
• Airbag module
• Door trim panel
• Door in white
• Seat
Head airbag:
• Airbag module [AIRBAG,ROOF]
• A-pillar trim panel
• Headliner
• Cover, B-pillar (if damaged)
• C-pillar trim panel (if damaged
• Connection/mount (on side frame)
Knee airbag:
• Airbag module [ AIRBAG,KNEE BOLSTER]
• Trim panel (driver's side)
• Glove compartment incl. Knee protection (passenger´s side)
•Check components for damage, replace if necessary
Important!
Only repair those cables which show visible signs of damage. In the event of visible damage, make sure there is only one cable repair in effect after the repair work. If no visible damage can be identified, the entire cable must be replaced. When carrying out repairs to the airbag wiring harness, you must use the spare parts offered in the out Electronic Parts Catalogue (EPC).
| Additional Information |