OEM Restraints System Part Replacement Search
2022 Kia TELLURIDE
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
(Always check service manual)NO OEM GUIDELINES AVAILABLE AT THIS TIME
REV:02/2025
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
Before starting the work related to the airbag, check the diagnosis trouble code (DTC) by using the (KDS), and perform the related work byusing the diagnosis trouble code (DTC) list.
1. When the front airbag(s) deployed after collision, replace the following components.
1) SRS Control Module (SRSCM)
2) Deployed airbag(s)
3) Front Impact Sensor
4) SRS wiring harness
5) When the driver airbag (DAB) module is deployed, damage to the clock spring is checked and replaced if there is an abnormality.
2. When the Side Airbag (SAB)/Curtain Airbag (CAB) module is deployed after a crash, replace the following components.
1) SRS Control Module (SRSCM)
2) Deployed airbag(s)
3) Side impact sensor(s) on the deployed side(s)
4) SRS wiring harness
3. After repairing the vehicle, check if the SRS operates normally.
1) Turn IG ON. The airbag warning lamp should turns off after turning on for 3 • 6 seconds
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
NO OEM GUIDELINES AVAILABLE AT THIS TIME| Additional Information |