OEM Restraints System Part Replacement Search
2021 Kia Sorento Hybrid
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
1. Turn ignition switch OFF2. Disconnect the negative cable from the battery
3. wait for at least thirty seconds before beginning to work
Before removing any of the SRS parts (including the disconnection of the connectors), always disconnect the SRS connector
REV: 07/2024
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
When the front airbag(s) deployed after a collision, replace the following items:• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG,STEERING WHEEL; AIRBAG,INSTRUMENT PNL]
• Seat belt pretensioner(s)
• Front impact sensors [AIRBAG SENSOR,FRONT]
• Replace the crash pad which is damaged when PAB is deployed
When the side/curtain airbag(s) deployed after a collision, replace the following items.
• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG & SEAT BACK ASSY; AIRBAG,ROOF]
• Side impact sensor(s) for the deployed side(s) [AIRBAG SENSOR,FRT DOOR; AIRBAG SENSOR,QTR PANEL]
• SRS wiring harnesses
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
• Inspect the clock spring for heat damage. If any damage found, replace the clock spring.• Steering wheel
• After the vehicle is completely repaired, confirm the SRS airbag system is OK
| Additional Information |