OEM Calibration Requirements Search

2017 Cadillac ATS Sedan

Print

Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.

How To Use The OEM Calibration Requirements Search

Vehicle System Definitions

ADAS, Calibration, And Scanning Article Hotspot

Additional RTS OEM Information


Camera in Deck Lid/Liftgate/Tailgate

OEM Name: Rearview Driver Information Camera

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Camera in Deck Lid/Liftgate/Tailgate Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Camera Near Rearview Mirror

OEM Name: Front View Camera Module

Calibration/Initialization Requirement Events:

  • After a collision repair
  • After airbag deployment
  • If camera is removed/installed or replaced
  • If DTC indicates
  • If windshield is removed/installed or replaced
Camera Near Rearview Mirror Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
Module programming is required if camera is replaced with a new one.


Sensor(s) Behind Front Bumper Cover/Grille (Middle)

OEM Name: Adaptive Cruise Control Module

Calibration/Initialization Requirement Events:

  • After a collision repair
  • After airbag deployment
  • If DTC indicates
  • If sensor is removed/installed or replaced
Sensor(s) Behind Front Bumper Cover/Grille (Middle) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
Module programming is required if sensor is replaced with a new one.


Sensor(s) Behind Front Bumper Cover/Grille (Sides)

OEM Name: Short Range Radar Sensor

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Sensor(s) Behind Front Bumper Cover/Grille (Sides) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
Module programming is required if sensor is replaced with a new one.


Sensor(s) Behind Rear Bumper Cover (Middle)

OEM Name: Short Range Radar Sensor

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Sensor(s) Behind Rear Bumper Cover (Middle) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
Module programming is required if sensor is replaced with a new one.


Sensor(s) Behind Rear Bumper Cover (Sides)

OEM Name: Side Obstacle Detection Control Module

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Sensor(s) Behind Rear Bumper Cover (Sides) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
Module programming is required if sensor is replaced with a new one.


Sensor(s) in Additional Location(s) (1)

OEM Name: (multiple inputs)

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Sensor(s) in Additional Location(s) (1) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
Receives input from:

  • Speed sensor
  • Steering angle sensor


Sensor(s) in Additional Location(s) (2)

OEM Name: (multiple inputs)

Calibration/Initialization Requirement Events:

  • If DTC indicates
  • If headlamp leveling control module is removed/installed or replaced
  • If leveling sensor is removed/installed or replaced
Sensor(s) in Additional Location(s) (2) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
Receives input from:

  • Front headlamp leveling sensor
  • Rear headlamp leveling sensor


Sensor(s) in Front Bumper Cover/Grille

OEM Name: Parking Assist Alarm Sensor

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Sensor(s) in Front Bumper Cover/Grille Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Sensor(s) in Rear Bumper Cover

OEM Name: Parking Assist Alarm Sensor

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Sensor(s) in Rear Bumper Cover Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X
Additional Information