OEM Calibration Requirements Search
2022 Kia Forte
Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.
Camera in Deck Lid/Liftgate/Tailgate
OEM Name: Rear View Camera
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Camera in Deck Lid/Liftgate/Tailgate | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera Near Rearview Mirror
OEM Name: Front View Camera
Calibration/Initialization Requirement Events:
- If camera is removed/installed
- If camera mounting bracket is deformed
- If DTC indicates
- If windshield is removed/installed or replaced
| Camera Near Rearview Mirror | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
Module programming is required if camera is replaced with a new one.
Sensor(s) Behind Front Bumper Cover/Grille
OEM Name: Front Radar
Calibration/Initialization Requirement Events:
- If DTC indicates
- If sensor does not detect a vehicle in front
- If sensor is removed/installed or replaced
- If sensor or surrounding parts are impacted by a collision
- If steering angle sensor is replaced or adjusted
| Sensor(s) Behind Front Bumper Cover/Grille | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
Module programming is required if sensor is replaced with a new one.
Sensor(s) in Quarter Panel Behind Bumper Cover (Sides)
OEM Name: Rear Corner Radar
Calibration/Initialization Requirement Events:
- If DTC indicates
- If sensor is replaced
- If sensor mounting bracket is replaced
- If sensor wire is replaced
| Sensor(s) in Quarter Panel Behind Bumper Cover (Sides) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
Module programming is required if sensor is replaced with a new one.
Sensor(s) in Rear Bumper Cover
OEM Name: Parking Distance Warning Sensor
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Sensor(s) in Rear Bumper Cover | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
| Additional Information | |