OEM Calibration Requirements Search

2020 Hyundai Elantra

Print

Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.

How To Use The OEM Calibration Requirements Search

Vehicle System Definitions

ADAS, Calibration, And Scanning Article Hotspot

Additional RTS OEM Information


Camera in Deck Lid/Liftgate/Tailgate

OEM Name: Rear View Camera

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Camera in Deck Lid/Liftgate/Tailgate Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Camera Near Rearview Mirror

OEM Name: Front View Camera Unit

Calibration/Initialization Requirement Events:

  • If camera coupler is deformed
  • If camera is removed/installed or replaced
  • If DTC indicates
  • If windshield is removed/installed or replaced
Camera Near Rearview Mirror Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
Module programming is required if camera is replaced with a new one.


Sensor(s) Behind Front Bumper Cover/Grille

OEM Name: Smart Cruise Control Unit

Calibration/Initialization Requirement Events:

  • If DTC indicates
  • If sensor does not detect a vehicle in front
  • If sensor is removed/installed or replaced
  • If sensor or surrounding area is impacted by a collision
  • If vehicle had a collision with structural damage that required a wheel alignment
Sensor(s) Behind Front Bumper Cover/Grille Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
Module programming is required if sensor is replaced with a new one.


Sensor(s) in Additional Location(s)

OEM Name: (multiple inputs)

Calibration/Initialization Requirement Events:

  • If AFLS ECU is replaced
  • If height sensor is removed/installed or replaced
Sensor(s) in Additional Location(s) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
Receives input from:

  • steering angle sensor
  • speed sensor
  • height sensor

Module programming is required if module is replaced with a new one.


Sensor(s) in Front Bumper Cover/Grille

OEM Name: Parking Distance Warning Sensor

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Sensor(s) in Front Bumper Cover/Grille Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Sensor(s) in Quarter Panel Behind Bumper Cover (Sides)

OEM Name: Blind-Spot Radar Unit

Calibration/Initialization Requirement Events:

  • If DTC indicates
  • If sensor is removed/installed or replaced
  • If sensor mounting bracket is removed/installed or replaced
Sensor(s) in Quarter Panel Behind Bumper Cover (Sides) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
Module programming is required if sensor is replaced with a new one.


Sensor(s) in Rear Bumper Cover

OEM Name: Parking Distance Warning Sensor

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Sensor(s) in Rear Bumper Cover Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X
Additional Information