OEM Calibration Requirements Search
2019 Honda Accord
Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.
Camera in Deck Lid/Liftgate/Tailgate
OEM Name: Multi-View Rear Camera
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Camera in Deck Lid/Liftgate/Tailgate | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera in Side Mirror (Right)
OEM Name: LaneWatch Camera
Calibration/Initialization Requirement Events:
- If any repairs are made to the passenger door assembly
- If front passenger door is adjusted
- If front passenger door is removed/installed or replaced
- If LaneWatch camera unit is removed/installed or replaced
- If passenger side power mirror assembly is removed/installed or replaced
| Camera in Side Mirror (Right) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera Near Rearview Mirror
OEM Name: Multipurpose Camera
Calibration/Initialization Requirement Events:
- If camera is removed/installed or replaced
- If DTC indicates
- If structural repairs are made
- If supplemental restraint system (SRS) is deployed
- If windshield is removed/installed or replaced
| Camera Near Rearview Mirror | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) Behind Front Bumper Cover/Grille
OEM Name: Millimeter Wave Radar
Calibration/Initialization Requirement Events:
- If DTC indicates
- If front bumper cover is repaired within 300 mm of millimeter wave radar unit
- If millimeter wave radar unit is removed/installed or replaced
- If structural repairs are made
- If supplemental restraint system (SRS) is deployed
| Sensor(s) Behind Front Bumper Cover/Grille | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) in Front Bumper Cover/Grille (Sides)
OEM Name: Parking and Back-Up Sensor
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Sensor(s) in Front Bumper Cover/Grille (Sides) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) in Quarter Panel Behind Bumper Cover (Sides)
OEM Name: BSI Radar Unit
Calibration/Initialization Requirement Events:
- If body panel repairs are made near the BSI mounting location
- If BSI radar unit is removed/installed or replaced
- If DTC indicates
- If rear end structural repairs are made
| Sensor(s) in Quarter Panel Behind Bumper Cover (Sides) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) in Rear Bumper Cover
OEM Name: Parking and Back-Up Sensor
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Sensor(s) in Rear Bumper Cover | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
| Additional Information | |