OEM Calibration Requirements Search
2019 Cadillac XT5
Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.
Camera in Deck Lid/Liftgate/Tailgate (Rear View Only)
OEM Name: Rearview Driver Information Camera
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Camera in Deck Lid/Liftgate/Tailgate (Rear View Only) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera in Deck Lid/Liftgate/Tailgate (With 360° View)
OEM Name: Rearview Driver Information Camera
Calibration/Initialization Requirement Events:
- If any camera or body component that camera is attached to is removed/installed, replaced, or adjusted
- If camera is removed/installed or replaced
- If DTC indicates
| Camera in Deck Lid/Liftgate/Tailgate (With 360° View) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera in Front Bumper Cover/Grille
OEM Name: Front View Driver Information Camera
Calibration/Initialization Requirement Events:
- If any camera or body component that camera is attached to is removed/installed, replaced, or adjusted
- If camera is removed/installed or replaced
- If DTC indicates
| Camera in Front Bumper Cover/Grille | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera in Side Mirror (Left)
OEM Name: Side View Driver Information Camera
Calibration/Initialization Requirement Events:
- If any camera or body component that camera is attached to is removed/installed, replaced, or adjusted
- If camera is removed/installed or replaced
- If DTC indicates
| Camera in Side Mirror (Left) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera in Side Mirror (Right)
OEM Name: Side View Driver Information Camera
Calibration/Initialization Requirement Events:
- If any camera or body component that camera is attached to is removed/installed, replaced, or adjusted
- If camera is removed/installed or replaced
- If DTC indicates
| Camera in Side Mirror (Right) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera Near Rearview Mirror
OEM Name: Front View Camera
Calibration/Initialization Requirement Events:
- After a collision repair
- After airbag deployment
- If camera is removed/installed or replaced
- If DTC indicates
- If vehicle ride height changes
- If windshield is removed/installed or replaced
| Camera Near Rearview Mirror | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
Module programming is required if camera is replaced with a new one.
Sensor(s) Behind Front Bumper Cover/Grille
OEM Name: Forward Range Radar
Calibration/Initialization Requirement Events:
- After a collision repair
- After airbag deployment
- If DTC indicates
- If sensor is removed/installed or replaced
| Sensor(s) Behind Front Bumper Cover/Grille | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
Module programming is required if sensor is replaced with a new one.
Sensor(s) Behind Front Bumper Cover/Grille (Sides)
OEM Name: Short Range Radar Sensor
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Sensor(s) Behind Front Bumper Cover/Grille (Sides) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
Module programming is required if sensor is replaced with a new one.
Sensor(s) Behind Rear Bumper Cover (Middle)
OEM Name: Short Range Radar Sensor
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Sensor(s) Behind Rear Bumper Cover (Middle) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
Module programming is required if sensor is replaced with a new one.
Sensor(s) Behind Rear Bumper Cover (Sides)
OEM Name: Side Obstacle Detection Control Module
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Sensor(s) Behind Rear Bumper Cover (Sides) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
Module programming is required if sensor is replaced with a new one.
Sensor(s) in Additional Location(s)
OEM Name: (multiple inputs)
Calibration/Initialization Requirement Events:
- If DTC indicates
- If headlamp leveling control module is serviced
- If leveling sensor is removed/installed or replaced
| Sensor(s) in Additional Location(s) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
Receives input from:
- front suspension position sensor
- rear suspension position sensor
Sensor(s) in Front Bumper Cover/Grille
OEM Name: Advanced Parking Assist Alarm Sensor
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Sensor(s) in Front Bumper Cover/Grille | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) in Rear Bumper Cover
OEM Name: Rear Parking Assist Alarm Sensor
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Sensor(s) in Rear Bumper Cover | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
| Additional Information | |