OEM Calibration Requirements Search
2017 Kia Optima PHEV
Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.
Camera in Deck Lid/Liftgate/Tailgate (Rear View Only)
OEM Name: Back View Camera
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Camera in Deck Lid/Liftgate/Tailgate (Rear View Only) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera in Deck Lid/Liftgate/Tailgate (With 360° View)
OEM Name: Rear Pantoscopic Camera
Calibration/Initialization Requirement Events:
- If a wide camera is removed/installed
- If conducting a body task, such as the trunk task, that causes the focus of the wide camera to change
- If door mirror with a wide camera is replaced
- If surround view monitoring unit is replaced
| Camera in Deck Lid/Liftgate/Tailgate (With 360° View) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
OEM Name: Front Pantoscopic Camera
Calibration/Initialization Requirement Events:
- If a wide camera is removed/installed
- If conducting a body task, such as the trunk task, that causes the focus of the wide camera to change
- If door mirror with a wide camera is replaced
- If surround view monitoring unit is replaced
| Camera in Front Bumper Cover/Grille (With 360° View) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
OEM Name: Right Pantoscopic Camera
Calibration/Initialization Requirement Events:
- If a wide camera is removed/installed
- If conducting a body task, such as the trunk task, that causes the focus of the wide camera to change
- If door mirror with a wide camera is replaced
- If surround view monitoring unit is replaced
| Camera in Side Mirror (With 360° View) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
OEM Name: Left Pantoscopic Camera
Calibration/Initialization Requirement Events:
- If a wide camera is removed/installed
- If conducting a body task, such as the trunk task, that causes the focus of the wide camera to change
- If door mirror with a wide camera is replaced
- If surround view monitoring unit is replaced
| Camera in Side Mirror (With 360° View) Left | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera Near Rearview Mirror
OEM Name: LKAS Unit
Calibration/Initialization Requirement Events:
- if camera coupler is deformed
- If camera is removed/installed or replaced
- If DTC indicates
- If windshield glass is removed/installed or replaced
| Camera Near Rearview Mirror | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
When replacing the front view camera with a new one, perform the variant coding procedure.
Sensor(s) Behind Front Bumper Cover/Grille
OEM Name: Advanced Smart Cruise Control Unit - Radar
Calibration/Initialization Requirement Events:
- If radar sensor or the surrounding parts are impacted by a collision
- If sensor does not detect a vehicle in front
- If sensor is reinstalled or replaced
- If steering angle sensor is replaced or adjusted
| Sensor(s) Behind Front Bumper Cover/Grille | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) Behind Rear Bumper Cover (Sides)
OEM Name: Blind Spot Detection Unit
Calibration/Initialization Requirement Events:
- If rear bumper accident occurs
- If sensor is removed/installed or replaced
| Sensor(s) Behind Rear Bumper Cover (Sides) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) in Additional Location(s)
OEM Name: Multiple Inputs
Calibration/Initialization Requirement Events:
- If ALFS ECU is replaced
- If height sensor is replaced
| Sensor(s) in Additional Location(s) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
Receives input from:
- front height sensor
- rear height sensor
- speed sensor
- steering angle sensor
Sensor(s) in Rear Bumper Cover
OEM Name: Parking Assist Sensor
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Sensor(s) in Rear Bumper Cover | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
| Additional Information | |