OEM Calibration Requirements Search
2017 Chrysler 300
Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.
Camera in Deck Lid/Liftgate/Tailgate
OEM Name: Rear View Camera (RVC) (4) (also known as ParkView™)
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Camera in Deck Lid/Liftgate/Tailgate | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera Near Rearview Mirror
OEM Name: Forward Facing Camera
Calibration/Initialization Requirement Events:
- If customer brings in a vehicle with lane departure warning (LDW) system behavior concerns
- If FFC is removed or replaced
- If windshield is replaced
| Camera Near Rearview Mirror | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera on Rearview Mirror
OEM Name: SmartBeam Camera
Calibration/Initialization Requirement Events:
- If mirror mounting button is replaced or reinstalled
- If rearview camera is replaced or reinstalled
- If SmartBeam camera is replaced or reinstalled
- If windshield is replaced
| Camera on Rearview Mirror | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
This adaptive lighting system and mirror is different from the forward facing camera system that includes adaptive lighting, along with collision braking, collision warning, and lane departure warning. This vehicle can have only one of these cameras on the rearview mirror.
Sensor(s) Behind Rear Bumper Cover
OEM Name: Blind Spot Sensor
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Sensor(s) Behind Rear Bumper Cover | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) in Front Bumper Cover/Grille
OEM Name: Park Assist Sensor
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Sensor(s) in Front Bumper Cover/Grille | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) in Front Bumper Cover/Grille (Lower)
OEM Name: Adaptive Cruise Control Sensor
Calibration/Initialization Requirement Events:
- If ACC sensor is removed and reinstalled
- If DTC indicates
- If front end structural repairs are performed
| Sensor(s) in Front Bumper Cover/Grille (Lower) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) in Rear Bumper Cover
OEM Name: Park Assist Sensor
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Sensor(s) in Rear Bumper Cover | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
| Additional Information | |