OEM Calibration Requirements Search

2016 Chrysler 200

Print

Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.

How To Use The OEM Calibration Requirements Search

Vehicle System Definitions

ADAS, Calibration, And Scanning Article Hotspot

Additional RTS OEM Information


Camera in Deck Lid/Liftgate/Tailgate

OEM Name: Rear View Camera (RVC) (4) (also known as ParkView™)

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Camera in Deck Lid/Liftgate/Tailgate Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Camera Near Rearview Mirror

OEM Name: Forward Facing Camera

Calibration/Initialization Requirement Events:

  • If customer brings in a vehicle with lane departure warning system behavior concerns
  • If FFC is removed or replaced
  • If FFC module is removed from the bracket and then reinstalled
  • If windshield is removed or replaced
Camera Near Rearview Mirror Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Sensor(s) Behind Rear Bumper Cover

OEM Name: Blind Spot Sensor

Calibration/Initialization Requirement Events:

  • If sensor is replaced
Sensor(s) Behind Rear Bumper Cover Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Sensor(s) in Front Bumper Cover/Grille

OEM Name: Park Assist Sensor (inboard)

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Sensor(s) in Front Bumper Cover/Grille Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Sensor(s) in Front Bumper Cover/Grille (Lower)

OEM Name: Adaptive Speed Control Sensor

Calibration/Initialization Requirement Events:

  • If ACC sensor is removed and reinstalled, alignment is required
  • If any suspension or vehicle alignment changes
  • If DTC indicates
  • If front end structural repairs are performed
Sensor(s) in Front Bumper Cover/Grille (Lower) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Sensor(s) in Front Bumper Cover/Grille (Sides)

OEM Name: Park Assist Sensor (outboard)

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Sensor(s) in Front Bumper Cover/Grille (Sides) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Sensor(s) in Rear Bumper Cover

OEM Name: Park Assist Sensor (inboard)

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Sensor(s) in Rear Bumper Cover Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Sensor(s) in Rear Bumper Cover (Sides)

OEM Name: Park Assist Sensor (outboard)

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Sensor(s) in Rear Bumper Cover (Sides) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X
Additional Information