OEM Hybrid And Electric Vehicle Disable Search

---

2023 Volkswagen ID.4

Click the links below for OEM repair information. (Note: additional purchase is required for a subscription to each OEM's repair information website.)

---

	Yes	No	Not Identified
Scan Tool Required	X
HV DVOM Required	X

Accessing Disable Procedure

To find the Volkswagen High-Voltage Disable Procedures:

1. Go to www.erwin.vw.com
2. Enter username and password (right side of webpage)
3. Click Login
4. Click OK (popup window)
5. Click Service Information tab (top of webpage)
6. Enter vehicle
• option 1: Enter VIN (vehicle identification number tab)
• option 2: Select Year and Model (guided search tab)
7. Category 1, select Repair Manual
8. Leave Category 2 blank
9. Click Search
10. Select Electric Rear Wheel Drive EIP220 and All Wheel Drive EIA210 from list
11. Click OK (popup window)
12. Scroll down to the last page and click OK
13. Scroll down to the table of contents and click High Voltage System, De-Energizing

Hybrid And Electric Vehicle Welding Best Practices

"When performing welding, sanding or cutting procedures near the high-voltage components, the system must be de-energized by a high-voltage technician."

Refinish Precautions

"Risk of damaging the battery cells at too high of drying temperatures!

• Observe the maximum drying time of 30 minutes at a drying temperature of 80°C (176°F).
• Observe the maximum drying time of 45 minutes at a drying temperature of 60°C (140°F).
• Protect all high-voltage components from direct infrared radiation when IR drying." (surface temperature)

---

Additional Information

Hybrid And Electric Vehicle Article Hotspot