Print
Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.
Camera in Deck Lid/Liftgate/Tailgate (Rear View Only)
OEM Name: Rearview Camera
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Camera in Deck Lid/Liftgate/Tailgate (Rear View Only) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera in Deck Lid/Liftgate/Tailgate (With 360° View)
OEM Name: Rearview Camera
Calibration/Initialization Requirement Events:
- If any camera or body component that camera is attached to is removed/installed or replaced
- If deck lid/liftgate/tailgate or trunk is adjusted
- If driver or front passenger door is removed/installed, replaced, or adjusted
- If DTC indicates
- If repairs are made to the drivers or front passenger door
| Camera in Deck Lid/Liftgate/Tailgate (With 360° View) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera in Front Bumper Cover/Grille
OEM Name: Multi View Front Camera
Calibration/Initialization Requirement Events:
- If any camera or body component that camera is attached to is removed/installed or replaced
- If deck lid/liftgate/tailgate or trunk is adjusted
- If driver or front passenger door is removed/installed, replaced, or adjusted
- If DTC indicates
- If repairs are made to the drivers or front passenger door
| Camera in Front Bumper Cover/Grille | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera in Side Mirror (Left)
OEM Name: Multi View Side Camera
Calibration/Initialization Requirement Events:
- If any camera or body component that camera is attached to is removed/installed or replaced
- If deck lid/liftgate/tailgate or trunk is adjusted
- If driver or front passenger door is removed/installed, replaced, or adjusted
- If DTC indicates
- If repairs are made to the drivers or front passenger door
| Camera in Side Mirror (Left) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera in Side Mirror (Right)
OEM Name: Multi View Side Camera
Calibration/Initialization Requirement Events:
- If any camera or body component that camera is attached to is removed/installed or replaced
- If deck lid/liftgate/tailgate or trunk is adjusted
- If driver or front passenger door is removed/installed, replaced, or adjusted
- If DTC indicates
- If repairs are made to the drivers or front passenger door
| Camera in Side Mirror (Right) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera Near Rearview Mirror
OEM Name: Multipurpose Camera
Calibration/Initialization Requirement Events:
- If DTC indicates
- If multipurpose camera unit is removed/installed or replaced
- If structural repairs are made
- If supplemental restraint system (SRS) is deployed
- If windshield is removed/installed or replaced
| Camera Near Rearview Mirror | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) Behind Front Bumper Cover/Grille
OEM Name: Millimeter Wave Radar
Calibration/Initialization Requirement Events:
- If DTC indicates
- If front bumper cover is repaired within 300 mm of millimeter wave radar unit
- If millimeter wave radar unit is removed/installed or replaced
- If structural repairs are made
- If supplemental restraint system (SRS) is deployed
| Sensor(s) Behind Front Bumper Cover/Grille | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) in Front Bumper Cover/Grille
OEM Name: Parking and Back-Up Sensor
Calibration/Initialization Requirement Events:
- If sensor is replaced
- If sensor mounting location is changed
| Sensor(s) in Front Bumper Cover/Grille | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) in Quarter Panel Behind Bumper Cover (Sides)
OEM Name: Blind Spot Information Radar
Calibration/Initialization Requirement Events:
- If body panel repairs are made near the BSI mounting location
- If BSI radar unit is removed/installed or replaced
- If DTC indicates
- If rear end structural repairs are made
| Sensor(s) in Quarter Panel Behind Bumper Cover (Sides) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
Per the Acura Service Information manual, an operation check is required. (BSI Radar Unit Aiming Inspection)
Sensor(s) in Rear Bumper Cover
OEM Name: Parking and Back-Up Sensor
Calibration/Initialization Requirement Events:
- If sensor is replaced
- If sensor mounting location is changed
| Sensor(s) in Rear Bumper Cover | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |