OEM Calibration Requirements Search
2025 Dodge Durango
Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.
Camera in Deck Lid/Liftgate/Tailgate
OEM Name: Rear Camera
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Camera in Deck Lid/Liftgate/Tailgate | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera Near Rearview Mirror
OEM Name: Forward Facing Camera Module
Calibration/Initialization Requirement Events:
- If camera is removed from bracket
- If camera is removed/installed or replaced
- If customer brings in a vehicle with lane departure warning system behavior concerns
- If DTC indicates
- If windshield is removed/installed or replaced
| Camera Near Rearview Mirror | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera on Rearview Mirror
OEM Name: Smart Beam
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Camera on Rearview Mirror | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
Per Dodge service information: "New and unused replacement SmartBeam® units are shipped calibrated from the factory. Replace the mirror assembly if a loss of calibration is experienced."
Sensor(s) Behind Front Bumper Cover/Grille
OEM Name: Adaptive Cruise Control Module
Calibration/Initialization Requirement Events:
- If DTC indicates
- If front end parts requiring sensor removal, are removed/installed or replaced
- If malfunction indicator light is illuminated
- If rear axle adjustments are made
- If sensor is removed/installed or replaced
| Sensor(s) Behind Front Bumper Cover/Grille | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) Behind Rear Bumper Cover (Sides)
OEM Name: Blind Spot Sensor
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Sensor(s) Behind Rear Bumper Cover (Sides) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) in Additional Location(s)
OEM Name: (multiple inputs)
Calibration/Initialization Requirement Events:
- If automatic headlamp leveling control module is replaced
- If DTC indicates
| Sensor(s) in Additional Location(s) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
Receives input from:
- front axle leveling sensor
- rear axle leveling sensor
- yaw rate sensor
Sensor(s) in Rear Bumper Cover
OEM Name: Park Assist Sensor
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Sensor(s) in Rear Bumper Cover | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
| Additional Information | |