OEM Calibration Requirements Search
2020 Dodge Charger
Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.
Camera in Deck Lid/Liftgate/Tailgate
OEM Name: Rear View Camera
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Camera in Deck Lid/Liftgate/Tailgate | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera Near Rearview Mirror
OEM Name: Forward Facing Camera
Calibration/Initialization Requirement Events:
- If camera is removed from the bracket and then reinstalled
- If camera is removed/installed or replaced
- If customer brings in a vehicle with lane departure warning (LDW) system behavior concerns
- If windshield is removed/installed or replaced
| Camera Near Rearview Mirror | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera on Rearview Mirror
OEM Name: SmartBeam Camera
Calibration/Initialization Requirement Events:
- If camera is removed/installed or replaced
- If mirror mounting button is removed/installed or replaced
- If rearview mirror is removed/installed or replaced
- If windshield is removed/installed or replaced
| Camera on Rearview Mirror | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
This adaptive lighting system and mirror is different from the forward facing camera system that includes adaptive lighting, along with collision braking, collision warning, and lane departure warning. This vehicle can have only one of these cameras on the rearview mirror.
Sensor(s) Behind Rear Bumper Cover
OEM Name: Blind Spot Sensor
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Sensor(s) Behind Rear Bumper Cover | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) in Front Bumper Cover/Grille (Lower)
OEM Name: Adaptive Speed Control Sensor
Calibration/Initialization Requirement Events:
- If any suspension or vehicle alignment changes
- If DTC indicates
- If front end structural repairs are performed
- If sensor is removed/installed or replaced
| Sensor(s) in Front Bumper Cover/Grille (Lower) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) in Rear Bumper Cover
OEM Name: ParkSense Sensor
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Sensor(s) in Rear Bumper Cover | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
| Additional Information | |