OEM Calibration Requirements Search
2018 Toyota Prius
Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.
Camera in Deck Lid/Liftgate/Tailgate
OEM Name: Television Camera
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Camera in Deck Lid/Liftgate/Tailgate | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera Near Rearview Mirror
OEM Name: Forward Recognition Camera
Calibration/Initialization Requirement Events:
- If camera is removed/installed or replaced
- If DTC indicates
- If windshield is removed/installed or replaced
| Camera Near Rearview Mirror | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) Behind Front Bumper Cover/Grille
OEM Name: Millimeter Wave Radar Sensor
Calibration/Initialization Requirement Events:
- If DTC indicates
- If front bumper installation area on body is repaired
- If front bumper is damaged or deformed due to an accident or contact with other objects, etc.
- If mounting bracket is removed/installed or replaced
- If sensor is removed/installed or replaced
| Sensor(s) Behind Front Bumper Cover/Grille | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) Behind Rear Bumper Cover (Sides)
OEM Name: Blind Spot Monitor Sensor
Calibration/Initialization Requirement Events:
- If DTC indicates
- If sensor is removed/installed or replaced
| Sensor(s) Behind Rear Bumper Cover (Sides) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) in Front Bumper Cover/Grille
OEM Name: Ultrasonic Sensor
Calibration/Initialization Requirement Events:
- If auxiliary battery terminal is disconnected and connected
- If clearance warning ECU assembly is replaced
- If DTC indicates
- If front bumper cover/grille is removed/installed or replaced
- If sensor becomes misaligned
- If sensor is removed/installed or replaced
- If sensor is subjected to impact
- If steering angle sensor is removed/installed or replaced
- If suspension components and tires are replaced
| Sensor(s) in Front Bumper Cover/Grille | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) in Rear Bumper Cover
OEM Name: Ultrasonic Sensor
Calibration/Initialization Requirement Events:
- If auxiliary battery terminal is disconnected and connected
- If clearance warning ECU is replaced
- If DTC indicates
- If rear bumper cover is removed/installed or replaced
- If sensor becomes misaligned
- If sensor is removed/installed or replaced
- If sensor is subjected to impact
- If steering angle sensor is removed/installed or replaced
- If suspension components and tires are replaced
| Sensor(s) in Rear Bumper Cover | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
| Additional Information | |