2016 Ford Escape

OEM Calibration Requirements Search

Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.

OEM Name: Parking Aid Camera

Camera in Deck Lid/Liftgate/Tailgate	Yes	No	Not Identified
DTC Set	X
Scan Tool Required			X
Special Tools Required			X

Note:
Module programming is required if camera is replaced with a new one.

OEM Name: Side Obstacle Detection Control Module

Sensor(s) Behind Rear Bumper Cover (Sides)	Yes	No	Not Identified
DTC Set	X
Scan Tool Required			X
Special Tools Required			X

Note:
Module programming is required if sensor is replaced with a new one.

OEM Name: Front Parking Aid Sensor

Sensor(s) in Front Bumper Cover/Grille	Yes	No	Not Identified
DTC Set	X
Scan Tool Required	X
Special Tools Required	X

Note:
Per the Ford Workshop manual, operation checks are required. (Azimuth System Check, Elevation System Check)

OEM Name: Front Active Park Assist Sensors

Sensor(s) in Front Bumper Cover/Grille (Sides)	Yes	No	Not Identified
DTC Set	X
Scan Tool Required	X
Special Tools Required	X

Note:
Per the Ford Workshop manual, an operation check is required. (Azimuth System Check)

OEM Name: Rear Parking Aid Sensor

Note:
Per the Ford Workshop manual, operation checks are required. (Azimuth System Check, Elevation System Check)

Additional Information
ADAS, Calibration, And Scanning Article Hotspot	Ford ADAS Ford Glass Replacement