OEM Restraints System Part Replacement Search


2015 Kia FORTE SEDAN

DISABLE PROCEDURE AND TIME (Always Check Service Manual)

1. Turn ignition switch OFF.
2. Disconnect the negative cable from the battery.
3. Wait at least 3 minutes before beginning work.

Before removing any of the SRSCM parts (including the disconnection of the connectors), always disconnect the SRSCM connector.

REV: 09/2019

PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT

When the front airbag(s) deployed after a collision, replace the following items:
• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG,STEERING WHEEL; AIRBAG,INSTRUMENT PNL]
• Seat belt pretensioner(s)
• Anchor pretensioner(s)
• Front impact sensors [AIRBAG SENSOR,FENDER]
NOTE: Replace the crash pad which is damaged while passenger airbag (PAB) is deployed

When the side/curtain airbag(s) deployed after a collision, replace the following items:
• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG & SEAT BACK ASSY; AIRBAG,ROOF] When the front side airbag deployed after a collision, replace the seat back as an assembly
• Side impact sensor(s) for the deployed side(s) [AIRBAG SENSOR,FRT DOOR; AIRBAG SENSOR,SIDE]

PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED

• Steering wheel
• Inspect the clock spring for heat damage. If any damage found, replace the clock spring
• WCS reset and accuracy check
• After the vehicle is completely repaired, confirm the SRS airbag system is OK.

Additional Information


*This matrix does not currently contain all production vehicles sold in the United States. Please refer back to this page frequently to ensure the most up-to-date information. The following charts were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. To ensure that the most recent information is used, always refer to the vehicle maker's technical information before working with airbags and other passive restraint systems.


Related I-CAR Courses