OEM Restraints System Part Replacement Search


2008 Saab Saab 9-3 SportCombi

DISABLE PROCEDURE AND TIME (Always Check Service Manual)

1. Place the ignition in the LOCK position
2. Disconnect and cover the negative battery terminal
3. Wait at least 1 minute

PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT

WARNING:
Replace all seatbelts if it cannot be established without doubt which belts were in use when the accident occurred.

For a Front airbag deployment:

• Steering wheel, airbag and steering column assembly
• Coil spring (contact roller)
• Control module
• All seat belts with seat belt tensioners on the front seat use during a collision
• Both the rear seat belts on the outer seats. Those in use and those not in use during a collision
The seat belt for the centre seat on the rear seat, if used during the accident
• Passenger airbag, if deployed and the dashboard

• Any damaged restraint system part.

For a side airbag deployment:

• Control module
• All seat belts with seat belt tensioners on the front seat use during a collision
• Both the rear seat belts on the outer seats. Those in use and those not in use during a collision
The seat belt for the centre seat on the rear seat, if used during the accident
• Side airbag, if deployed with backrest upholstery bag

• Any damaged restraint system part


For an inflatable curtain deployment:

• Control module
• All seat belts with seat belt tensioners on the front seat use during a collision
• Both the rear seat belts on the outer seats. Those in use and those not in use during a collision
The seat belt for the centre seat on the rear seat, if used during the accident
• Inflatable curtains, if deployed
• A-, B-, C-pillar trim and headlining

• Any damaged restraint system part



PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED

• Knee shield
• SRS wiring harness
• Windscreen
• Front sensors, (The front sensors do not need to be replaced if there has been no mechanical damage to the sensor and if the sensor does not give a trouble code)
• Any damaged components
• Any restraint system part or wiring identified by diagnostic check

For a side airbag deployment:
• Wiring harness for the side impact sensor, side airbag and seat-belt tensioner
• Side impact sensors (The side impact sensors do not need to be replaced if there has been no mechanical damage to the sensor and if the sensor does not give a trouble code).
• Any restraint system part or wiring identified by diagnostic check

For an inflatable curtain deployment:
• Wiring harness for the side impact sensor, inflatable curtain and seat-belt tensioner
• Side impact sensors (The side impact sensors do not need to be replaced if there has been no mechanical damage to the sensor and if the sensor does not give a trouble code).
• Any restraint system part or wiring identified by diagnostic check


*This matrix does not currently contain all production vehicles sold in the United States. Please refer back to this page frequently to ensure the most up-to-date information. The following charts were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. To ensure that the most recent information is used, always refer to the vehicle maker's technical information before working with airbags and other passive restraint systems.


Related I-CAR Courses