OEM Restraints System Part Replacement Search

---

2019 Porsche 718 BOXSTER

DISABLE PROCEDURE AND TIME (Always Check Service Manual)

Read out the fault memory

1. Switch off ignition and remove the remote control from the ignition lock.
2. Disconnect and cover the negative terminal of the battery.
3. Wait 1 minute and only then disconnect the plug connection.

REV: 10/2021

PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT

The following components must be removed and replaced after the airbag system is triggered:

Triggered Airbag unit, driver's side:
1. Contact unit. [CLOCK SPRING]
2. Airbag unit, driver's side. [AIRBAG,STEERING WHEEL; AIRBAG,KNEE BOLSTER]
3. Triggering unit after the system is triggered for the third time [MODULE, AIRBAG CONTROL]
4. All airbag sensors in damaged/deformed areas of the vehicle must always be replaced

Triggered Airbag unit, passenger's side:
1. Airbag unit, passenger's side. [AIRBAG,INSTRUMENT PNL; AIRBAG,KNEE BOLSTER]
2. Triggering unit after the system is triggered for the third time [MODULE, AIRBAG CONTROL]
3. Dashboard. Also, check dashboard bracket for deformation and replace if necessary.
4. All airbag sensors in damaged/deformed areas of the vehicle must always be replaced

Triggered Side-airbag unit, seat:
1. Side-airbag unit, seat. [AIRBAG,FRONT SEAT]
2. Seat covering, deformed seat components.
3. Triggering unit after the system is triggered for the third time [MODULE, AIRBAG CONTROL]
4. All airbag sensors in damaged/deformed areas of the vehicle must always be replaced

Triggered Head airbag unit, door:
1. Head airbag unit. [AIRBAG,DRIVER DOOR; AIRBAG,FRT PASS DOOR]
3. All airbag sensors in damaged/deformed areas of the vehicle must always be replaced
3. Triggering unit after the system is triggered for the third time [MODULE, AIRBAG CONTROL]

Airbag sensor:
• All airbag sensors in damaged/deformed areas of the vehicle must always be replaced
• Triggering unit after the system is triggered for the third time [MODULE, AIRBAG CONTROL]

Seat-belt pretensioners:
• All triggered belt tensioner units.
• Triggering unit after the system is triggered for the third time [MODULE, AIRBAG CONTROL]

PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED

Triggered Airbag unit, passenger's side:
• Check dashboard bracket for deformation and replace if necessary

Seat-belt pretensioners:
Because it is difficult to visually determine if one or more belt tensioners has been triggered, check the following points:
– Using the PIWIS Tester 9818, read out the fault memory.
– Check plug connection on the belt tensioner for damage.
– Pull out the belt strap as far as possible and check for wear.
– Perform a function test on the automatic belt device.