OEM Restraints System Part Replacement Search


2019 Mercedes-Benz A-Class Sedan

DISABLE PROCEDURE AND TIME (Always Check Service Manual)

Before beginning with:
• body repairs
• Work on airbags or emergency tensioning retractors (removal, installation)
• Work on components associated with airbags or emergency tensioning retractors, or which require access to their electric circuit, e.g. for removal of the steering wheel:

1) Disconnect and isolate the battery ground line.

Before commencing welding work:
1. Remove ignition key or transmitter key.
2. Disconnect/insulate ground line from battery.
3. Remove connector from the control unit for the airbags and emergency tensioning retractors

The supplemental restraint system must always be tested with a diagnosis system.

REV: 05/2025

PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT

The generated gas flow deploys the airbag or tensions the belt strap (if equipped). Defective or damaged pyrotechnical components • must always be replaced:

• Driver airbag [AIRBAG,STEERING WHEEL]
• Front passenger airbag [AIRBAG,INSTRUMENT PNL]
• Sidebag [AIRBAG,FRONT SEAT]
• Window airbag [AIRBAG,ROOF]
• Headbag
• Kneebag [AIRBAG,KNEE BOLSTER]
• Pelvis airbag
• Emergency tensioning retractor with and without belt airbag
•Buckle emergency tensioning retractor
•Belt anchor fitting tensioner
•Pyrotechnical engine hood lifter with pyrotechnical activation (net reversible)
•Mechanical engine hood lifter with pyrotechnical activation ( not reversible)
•Pyrotechnical fuse (pyrofuse)
•Hinge trigger capsule


In the event of accidents with a driver airbag which has been triggered:

• Steering wheel
• Steering column tube [COLUMN ASSEMBLY,STRG]

must always be replaced


PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED

Pyrotechnical components are to be checked for external damage and replaced if necessary.

If axial play or a noise is detected at the steering column tube, this must always be replaced.

Defective or damaged pyrotechnical components, control units and their sensor systems must always be replaced. Repair of or tampering with such components is not permissible.

Components that come into contact with pyrotechnical components (e.g. instrument panel, door trim, glove compartment, seats, wiring harnesses, belt straps, etc.) must always be checked for damage and be replaced if necessary. Only technically approved component combinations are permissible.

Damaged or defective attachment or bolting points of pyrotechnical components must be properly repaired or replaced.

Additional Information


*This matrix does not currently contain all production vehicles sold in the United States. Please refer back to this page frequently to ensure the most up-to-date information. The following charts were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. To ensure that the most recent information is used, always refer to the vehicle maker's technical information before working with airbags and other passive restraint systems.


Related I-CAR Courses