2018 Kia Sorento
Details
Share:
|
Print
Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.
Vehicle System Options
| |
Yes |
No |
Not Identified |
| DTCs Set |
X |
|
|
| System MIL |
|
|
X |
| |
Yes |
No |
Not Identified |
| DTCs Set |
X |
|
|
| System MIL |
X |
|
|
| |
Yes |
No |
Not Identified |
| DTCs Set |
X |
|
|
| System MIL |
X |
|
|
| |
Yes |
No |
Not Identified |
| DTCs Set |
X |
|
|
| System MIL |
X |
|
|
| |
Yes |
No |
Not Identified |
| DTCs Set |
X |
|
|
| System MIL |
X |
|
|
| |
Yes |
No |
Not Identified |
| DTCs Set |
X |
|
|
| System MIL |
X |
|
|
| |
Yes |
No |
Not Identified |
| DTCs Set |
X |
|
|
| System MIL |
|
|
X |
| |
Yes |
No |
Not Identified |
| DTCs Set |
X |
|
|
| System MIL |
|
|
X |
| |
Yes |
No |
Not Identified |
| DTCs Set |
X |
|
|
| System MIL |
X |
|
|
| |
Yes |
No |
Not Identified |
| DTCs Set |
X |
|
|
| System MIL |
X |
|
|
| |
Yes |
No |
Not Identified |
| DTCs Set |
X |
|
|
| System MIL |
X |
|
|
Camera in Deck Lid/Liftgate/Tailgate
OEM Name: Rearview Camera
Calibration/Initialization Requirement Events:
-
No calibration/initialization requirements found
| Camera in Deck Lid/Liftgate/Tailgate |
Yes |
No |
Not Identified |
|
DTC Set
|
X |
|
|
|
Scan Tool Required
|
|
|
X |
|
Special Tools Required
|
|
|
X |
Systems Affected:
Rear View
Camera in Deck Lid/Liftgate/Tailgate (Middle)
OEM Name: Rear Pantoscopic Camera
Calibration/Initialization Requirement Events:
-
If any camera or body component that camera is attached to is removed or replaced
-
If surround view monitoring unit is replaced
| Camera in Deck Lid/Liftgate/Tailgate (Middle) |
Yes |
No |
Not Identified |
|
DTC Set
|
X |
|
|
|
Scan Tool Required
|
X |
|
|
|
Special Tools Required
|
X |
|
|
Systems Affected:
360° Camera View
Camera in Front Bumper Cover/Grille
OEM Name: Front Pantoscopic Camera
Calibration/Initialization Requirement Events:
-
If any camera or body component that camera is attached to is removed or replaced
-
If surround view monitoring unit is replaced
| Camera in Front Bumper Cover/Grille |
Yes |
No |
Not Identified |
|
DTC Set
|
X |
|
|
|
Scan Tool Required
|
X |
|
|
|
Special Tools Required
|
X |
|
|
Systems Affected:
360° Camera View
Camera in Side Mirror (Left)
OEM Name: Left Pantoscopic Camera
Calibration/Initialization Requirement Events:
-
If any camera or body component that camera is attached to is removed or replaced
-
If surround view monitoring unit is replaced
| Camera in Side Mirror (Left) |
Yes |
No |
Not Identified |
|
DTC Set
|
X |
|
|
|
Scan Tool Required
|
X |
|
|
|
Special Tools Required
|
X |
|
|
Systems Affected:
360° Camera View
Camera in Side Mirror (Right)
OEM Name: Right Pantoscopic Camera
Calibration/Initialization Requirement Events:
-
If any camera or body component that camera is attached to is removed or replaced
-
If surround view monitoring unit is replaced
| Camera in Side Mirror (Right) |
Yes |
No |
Not Identified |
|
DTC Set
|
X |
|
|
|
Scan Tool Required
|
X |
|
|
|
Special Tools Required
|
X |
|
|
Systems Affected:
360° Camera View
Camera Near Rearview Mirror
OEM Name: Lane Departure Warning System (LDWS) Unit
Calibration/Initialization Requirement Events:
-
If camera is removed or replaced
-
If DTC indicates
-
If mounting bracket is deformed
-
If windshield is removed or replaced
| Camera Near Rearview Mirror |
Yes |
No |
Not Identified |
|
DTC Set
|
X |
|
|
|
Scan Tool Required
|
X |
|
|
|
Special Tools Required
|
X |
|
|
Note:
After replacing the camera with a new one, the variant coding procedure must be performed.
Systems Affected:
Collision Warning
Collision Braking
Lane Departure Warning
Adaptive Lighting 1
Sensor(s) Behind Front Bumper Cover/Grille
OEM Name: Smart Cruise Control Unit
Calibration/Initialization Requirement Events:
-
If DTC indicates
-
If sensor does not detect a vehicle in front
-
If sensor is removed/installed or replaced
-
If sensor or the surrounding parts are impacted by a collision
-
If steering angle sensor is replaced or adjusted
| Sensor(s) Behind Front Bumper Cover/Grille |
Yes |
No |
Not Identified |
|
DTC Set
|
X |
|
|
|
Scan Tool Required
|
X |
|
|
|
Special Tools Required
|
X |
|
|
Note:
After replacing the sensor with a new one, the variant coding procedure must be performed.
Systems Affected:
Adaptive Cruise Control
Collision Warning
Collision Braking
Sensor(s) Behind Rear Bumper Cover
OEM Name: Parking Assist Sensor
Calibration/Initialization Requirement Events:
-
No calibration/initialization requirements found
| Sensor(s) Behind Rear Bumper Cover |
Yes |
No |
Not Identified |
|
DTC Set
|
X |
|
|
|
Scan Tool Required
|
|
|
X |
|
Special Tools Required
|
|
|
X |
Systems Affected:
Park Assist
Sensor(s) Behind Rear Bumper Cover (Sides)
OEM Name: Blind Spot Detection Unit
Calibration/Initialization Requirement Events:
-
If BSD mounting bracket or wire is replaced
-
If DTC indicates
-
If rear bumper accident occurs
-
If sensor is replaced
| Sensor(s) Behind Rear Bumper Cover (Sides) |
Yes |
No |
Not Identified |
|
DTC Set
|
X |
|
|
|
Scan Tool Required
|
X |
|
|
|
Special Tools Required
|
X |
|
|
Note:
After replacing the sensor with a new one, the variant coding procedure must be performed.
Systems Affected:
Blind Spot Detection
Rear Cross Traffic
Sensor(s) in Additional Location(s)
OEM Name: (multiple sensors)
Calibration/Initialization Requirement Events:
-
If AFLS ECU is replaced
-
If height sensor is replaced or adjusted
| Sensor(s) in Additional Location(s) |
Yes |
No |
Not Identified |
|
DTC Set
|
X |
|
|
|
Scan Tool Required
|
X |
|
|
|
Special Tools Required
|
|
|
X |
Note:
Receives input from:
- steering angle sensor
- wheel speed sensor
- height sensor
Systems Affected:
Adaptive Lighting 2
*This matrix does not currently contain all production vehicles sold in the United States. Please refer back to this page frequently to ensure the most up-to-date information. The contents are based on the repair information available from the vehicle maker. Updates and additions will be posted as they become available. To ensure that the most recent information is used, always refer to the vehicle maker's technical information.
Related I-CAR Courses
Course ADAS Diagnostics - When the Calibration Fails
Course ADAS Operation and Service
Course Calibration of Front Facing Cameras and Front Radars
Course Calibration Requirements for Blind Spot and Park Assist Systems
Course Camera Calibration, Inspection, and Initialization Requirements
Course Convenience Systems Operation and Service
Course Damage Analysis of Lighting and Vision Assist
Course Damage Discovery For ADAS Sensor Mounting Locations
Course Incorporating ADAS in Your Business
Course Initialization and Calibration of Electronic Systems
Course Introduction to Diagnostics and Scan Tools
Course Post Repair Advanced Driver Assistance Systems (ADAS) Testing
Course Requirements and Considerations for Achieving an Accurate Advanced Driver Assistance System (ADAS) Calibration
Course Static ADAS Calibration 3-Day Hands-On Skills Development
Course Understanding OEM Calibration Procedures and How to Locate Them
Course Windshields and Advanced Driver Assist Systems (ADAS)
Course I-CAR ADAS Courses
