OEM Calibration Requirements Search
2018 Kia Optima PHEV
Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.
Camera in Deck Lid/Liftgate/Tailgate (Rear View Only)
OEM Name: Back View Camera
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
Camera in Deck Lid/Liftgate/Tailgate (Rear View Only) | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Camera in Deck Lid/Liftgate/Tailgate (With 360° View)
OEM Name: Rear Pantoscopic Camera
Calibration/Initialization Requirement Events:
- If a wide camera is removed/installed
- If conducting a body task, such as the trunk task, that causes the focus of the wide camera to change
- If door mirror with a wide camera is replaced
- If surround view monitoring unit is replaced
Camera in Deck Lid/Liftgate/Tailgate (With 360° View) | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Camera in Front Bumper Cover/Grille (Middle)
OEM Name: Front Pantoscopic Camera
Calibration/Initialization Requirement Events:
- If a wide camera is removed/installed
- If conducting a body task, such as the trunk task, that causes the focus of the wide camera to change
- If door mirror with a wide camera is replaced
- If surround view monitoring unit is replaced
Camera in Front Bumper Cover/Grille (Middle) | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Camera in Side Mirror (Left)
OEM Name: Left Pantoscopic Camera
Calibration/Initialization Requirement Events:
- If a wide camera is removed/installed
- If conducting a body task, such as the trunk task, that causes the focus of the wide camera to change
- If door mirror with a wide camera is replaced
- If surround view monitoring unit is replaced
Camera in Side Mirror (Left) | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Camera in Side Mirror (Right)
OEM Name: Right Pantoscopic Camera
Calibration/Initialization Requirement Events:
- If a wide camera is removed/installed
- If conducting a body task, such as the trunk task, that causes the focus of the wide camera to change
- If door mirror with a wide camera is replaced
- If surround view monitoring unit is replaced
Camera in Side Mirror (Right) | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Camera Near Rearview Mirror
OEM Name: Lane Departure Warning System
Calibration/Initialization Requirement Events:
- If camera coupler is deformed
- If camera is removed/installed or replaced
- If DTC indicates
- If windshield glass is removed/installed or replaced
Camera Near Rearview Mirror | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Sensor(s) Behind Front Bumper Cover/Grille
OEM Name: Advanced Smart Cruise Control Unit - Radar
Calibration/Initialization Requirement Events:
- If radar sensor or the surrounding parts are impacted by a collision
- If sensor does not detect a vehicle in front
- If sensor is reinstalled or replaced
- If steering angle sensor is replaced or adjusted
Sensor(s) Behind Front Bumper Cover/Grille | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Sensor(s) Behind Rear Bumper Cover (Sides)
OEM Name: Blind Spot Detection Unit
Calibration/Initialization Requirement Events:
- If rear bumper accident occurs
- If sensor is replaced
Sensor(s) Behind Rear Bumper Cover (Sides) | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Sensor(s) in Additional Location(s)
OEM Name: Multiple Inputs
Calibration/Initialization Requirement Events:
- If AFLS ECU is replaced
- If height sensor is replaced
Sensor(s) in Additional Location(s) | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Note:
Receives input from:
- front height sensor
- rear height sensor
- speed sensor
- steering angle sensor
Sensor(s) in Rear Bumper Cover
OEM Name: Parking Assist Sensor
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
Sensor(s) in Rear Bumper Cover | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Additional Information | |
*This matrix does not currently contain all production vehicles sold in the United States. Please refer back to this page frequently to ensure the most up-to-date information. The contents are based on the repair information available from the vehicle maker. Updates and additions will be posted as they become available. To ensure that the most recent information is used, always refer to the vehicle maker's technical information.