Friday at SEMA, I-CAR hosted a panel discussion that was free to all SEMA attendees. The panel of experts consisted of Jason Bartanen (Director, Industry Technical Relations, I-CAR), Doug Richman (Advisor, Aluminum Association), David Anderson (Senior Director, Automotive Market, Steel Market Development Institute), and Michael Hoke (President, Abaris Training).
Ford has released the third installment of their On Target publication for 2018. Features of the issue include highlights of the 2019 Ford Ranger, aluminum rivet bonding techniques, and part 2 of roof replacement procedure on a 2018 Ford F-150. Let’s take a look at this edition.
Thursday at SEMA, I-CAR hosted a panel discussion with a panel of experts discussing adhesives technology. About changes in adhesives technologies, including crash-toughened adhesives. The panel was headed by Jason Bartanen (Director, Industry Technical Relations, I-CAR), Shawn Collins (Advanced Application Engineer, 3M), and Doug Craig (Applications Engineering Manager, LORD Corporation).
Wednesday at SEMA, I-CAR hosted a panel discussion on advanced joining technologies. The panel was headed by Jason Bartanen (Director, Industry Technical Relations, I-CAR), Kelly Logan (Director of Technical Services, CAR-O-LINER), Steve Marks (Manager, Specialty Training, I-CAR), and Oliver Woelfel (CEO Advanced Collision Repair Solutions).
Tuesday at SEMA, I-CAR held a panel discussion on advanced driver assistance systems (ADAS) and real-world collision challenges. The panel was headed by Jason Bartanen (Industry Technical Relations Director, I-CAR), Jake Rodenroth (Director of Industry Relations, asTech), and Jason Zeise (Mechanical Operations Manager, LaMettry's Collision, Inc.).
One of the top technical inquiries received at Ask I-CAR, "Is there a sectioning or partial replacement procedure available?" To help answer this question, RTS has an OEM Partial Part Replacement Search available. Here you will find information on if these procedures are available on a specific vehicle. Let's take a closer look at the 2017 Toyota RAV4 HV.
What is a non-SRS wiring repair? It is the repairing of an electrical component that is not part of the supplemental restraints system circuit (usually identified by yellow wire looms). As technology increases on vehicles, so does the number of components that utilize electricity. Many of the sensors and modules are becoming smarter and more sensitive. If the wire is too long, the wrong gauge, or spliced in the wrong location it can cause malfunctions in the components that it’s powering. Many OEMs have different restrictions and guidelines for repairing wiring that does not control SRS components. On the other hand, there are OEMs that don’t allow wiring repairs at all, so full harness replacement is the only option.
One of the top technical inquiries received at Ask I-CAR is, “Is there a sectioning or partial replacement procedure available?” To help answer this question, RTS has an OEM Partial Part Replacement Search available. Here you will find information on if these procedures are available on a specific vehicle. Let’s take a closer look at the 2017 Ford C-MAX Hybrid.
As a collision repair technician, there is one part of a service manual that houses all of the information you would ever need…right? This is not the case with modern vehicles. You may be required to look in numerous manuals to find the information required to safely repair the vehicle.
When it comes to diagnostic trouble codes (DTCs) after collision repairs, a common mistake is to simply clear the codes. However, this will not ensure all issues within a system have been repaired.
One of the top technical inquiries received at Ask I-CAR is, “Is there a sectioning or partial replacement procedure available?” To help answer this question, RTS has an OEM Partial Part Replacement Search available. Here you will find information on if these procedures are available on a specific vehicle. Let’s take a closer look at the 2018 Jeep Wrangler (JL).
What is a non-SRS wiring repair? It is the repairing of an electrical component that is not part of the supplemental restraints system circuit (usually identified by yellow wire looms). As technology increases on vehicles so does the number of components that utilize electricity. Many of the sensors and modules are becoming smarter and more sensitive. If the wire is too long, wrong gauge, or spliced in the wrong location it can cause malfunctions in the components that it’s powering. Many OEMs have different restrictions and guidelines for repairing wiring that does not control SRS components. On the other hand, there are OEMs that don’t allow wiring repairs at all, so full harness replacement is the only option.
Honda/Acura has issued an adhesive recommendation for some Honda and Acura models.
As a collision repair technician, there is one part of a service manual that houses all of the information you would ever need…right? This is not the case with modern vehicles. You may be required to look in numerous manuals to find the information required to safely repair the vehicle.
One of the top technical inquiries received at Ask I-CAR is, “Is there a sectioning or partial replacement procedure available?” To help answer this question, RTS has an OEM Partial Part Replacement Search available. Here you will find information on if these procedures are available on a specific vehicle. Let’s take a closer look at the 2018 Chrysler Pacifica.
As the industry continues to ask if pre- and post-repair system scanning is necessary, Toyota/Lexus/Scion provides their answer.
Are you wondering if a particular OEM or organization has a published statement on pre-repair and post-repair scanning? We have compiled a list of most of the statements on the subject, so you can...
Since advanced driver assistance systems (ADAS), scanning, and calibration first started becoming relevant, members of the collision repair industry have required as much knowledge as possible on...
Honda /Acura has updated their position statement on pre- and post-repair scanning to give more clarification on what is expected for scanning.
BMW has released a position statement related to pre- and post-repair system scanning. The statement applies to All vehicles equipped with on board diagnostics II (OBD II).
The I-CAR best practice article, Recycled Outer Quarter Panels w/Rolled Hem Flanges has gotten a lot of interest from the collision repair industry. It’s important to know which vehicles are...
As the industry continues to ask, are pre- and post-repair scans necessary, General Motors provides their answer.
Over the past few months, we've been sharing OEM position statements on restraints wiring repairs. Now we're bringing them all together in one place for easy reference.
FCA/Stellantis has released a position statement related to pre- and post-repair system scanning.
Nissan/INFINITI updated their position statement on pre- and post-repair scanning. The revised position statement touches on more subjects and gives additional information on the subject.
Repairer Driven News (RDN) released an article featuring an updated Rivian procedure.
The question is often asked, "Can supplemental restraints system wiring be repaired?" The answer is: it depends on the vehicle maker. Let's take a look at Rivian's position on this subject.
What is a non-SRS wiring repair? It is the repairing of an electrical component that is not part of the supplemental restraints system circuit (usually identified by yellow wire looms). As...
High-voltage (HV) vehicles have some special considerations for handling and storing HV batteries and other components. The dangers of HV batteries are potential even after removal which is why...
I-CAR had a discussion on KECO tools for lateral tension dent removal.
Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips...
Per your requests, here are the step-by-step instructions for submitting a library request in ALLDATA.
Sometimes, going back to the basics can make the difference between a quality repair and a failed repair. When researching some OEM body repair manuals (BRMs), you may find callouts for the use of...
Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips...
I-CAR held a repairability summit on supplemental restraints systems (SRS) inspections. In attendance were representatives from OEMs, information providers, collision repair facilities, and insurers.
