Maserati And Rolls-Royce OEM Information Pages
- Posted on 24 November 2015
The OEM Information pages continue to grow, here are a few of the new features for this area of the RTS portal.
OEM Partial Parts Replacement Search Update - BMW i3 And i8
- Posted on 19 November 2015
The I-CAR developed OEM Partial Parts Replacement Search on the RTS Portal now features updates on the BMW i3 and i8 vehicles through model year 2015.
Honda/Acura Restraints Wiring
- Posted on 13 November 2015
When it comes to supplemental restraints systems (SRS) wiring repairs there are a wide range of procedures between vehicle makers, so it is always important to check the service information before considering any repairs. Let's take a look at the Honda/Acura recommendations for SRS wiring repair.
2016 Honda Civic Built With 1,500 MPa Steel Rear Rails - Complete Part Replacement Required
- Posted on 10 November 2015
Earlier this year, at Great Designs In Steel (GDIS), Honda unveiled how they achieved a 20% weight reduction in rear rail design. The information was shared in presentation from Honda engineers titled: Hot Stamp Rear Frame Optimization. The solution included a hot stamped single piece stamping that resulted in a 1,500 MPa steel rear rail. That 1,500 MPa design has now made its way into production and is found on the 2016 Honda Civic.
Common Refrain At SCRS SEMA Event: You Must Follow OEM Guidelines
- Posted on 09 November 2015
Article originally appeared in Repairer Driven News on November 5, 2015 By John Huetter
The days of fixing a car based on your own skill and experience alone are over. You’ve got to reference and follow the OEM procedures every time.
This was stressed over and over by experts in such diverse fields as scanning, joining, steel and aluminum Thursday at the Society of Collision Repair Specialists OEM Collision Repair Technology Summit at SEMA.
In Case You Missed It: RTS Available Resources
- Posted on 05 November 2015
I-CAR's Director of Industry Technical Relations, Jason Bartanen, sat down at the 2015 SEMA Show with Fender Bender to discuss the progress and features of RTS since its launch in July 2014. Here's a breakdown of the main features of the portal.
Honda Has Released The 2016 Honda Civic Body Repair News Bulletin
- Posted on 04 November 2015
Honda has released the 2016 Honda Civic Body Repair News bulletin:
Update: Are General Sectioning Guidelines Still Applicable?
- Posted on 30 October 2015
Sectioning: the process of cutting a portion of a part based on the location of collision damage and vehicle maker recommendations, removing the part, and installing a portion of the undamaged service part. Additionally, sectioning is a process that is done away from a factory seam.
Volkswagen Restraints Wiring
- Posted on 29 October 2015
The question is often asked, "Can supplemental restraints system wiring be repaired?" The answer is: it depends on the vehicle maker. Let's take a look at Volkswagen's position on this subject.
Straightening And Heat: Toyota, Lexus, Scion
- Posted on 23 October 2015
A question often asked of the Repairability Techincal Supports (RTS) team is, does Toyota allow the use heat to straighten? There are several Collision Repair Information Bulletins (CRIBs) from Toyota, Lexus, and Scion that states their position on the use of heat when straightening.
Back On The Road, Safely (FF Journal)
- Posted on 21 October 2015
Article originally appeared in FF Journal March, 2014 - By Gretchen Salois
After an accident, reassuring repair work is essential.
The California Bureau of Automotive Repair (BAR) Recognizes I-CAR
- Posted on 12 October 2015
In October 2015, Automotive Repair and Smog Check News published their fall newsletter with an article titled "Piecing Together Proper Sectioning Repairs." This newsletter announces the fact that I-CAR best practices are now recognized as industry-accepted specifications, in the absence of OEM repair procedures, by the state of California.
How Do Ask I-CAR and DEG Help the Industry?
- Posted on 07 October 2015
The I-CAR Repairability Technical Support “Ask I-CAR” feature and the Database Enhancement Gateway (DEG) help the industry with common issues but in different ways. Let's take a look at what each can do for you.
Plastic Repair: Adhesion Promoter
- Posted on 06 October 2015
Adhesion promoters, or surface modifiers, are extremely important when making some types of adhesive plastic repairs. If the adhesion promoter is not applied when required, or applied incorrectly, the repair will fail. (although there are some exceptions because some plastics do not require adhesion promoters). Let’s take a look at some ways to avoid this type of repair failure.
Ford F-150 Adaptive Cruise Control Recall
- Posted on 02 October 2015
Ford has issued a recall on the 2015 Ford F-150 adaptive cruise control (ACC) system. Let's take a look at how this may affect your customers and prevent a potential comeback.
-
Toyota/Lexus/Scion Position Statement: Pre- and Post-Repair System Scanning
Thursday, 28 July 2016
As the industry continues to ask if pre- and post-repair system scanning is necessary, Toyota/Lexus/Scion provides their answer.
-
Pre- and Post-Repair System Scanning Position Statements
Wednesday, 9 January 2019
Are you wondering if a particular OEM or organization has a published position statement on pre-repair and post-repair scanning? We have compiled a list of most of the position statements on the...
-
ADAS, Calibration, And Scanning Article Hotspot
Monday, 14 January 2019
Since advanced driver assistance systems (ADAS), scanning, and calibration first started becoming relevant, members of the collision repair industry have required as much knowledge as possible on...
-
Honda/Acura Position Statement: Pre- and Post-Repair System Scanning - UPDATE
Wednesday, 22 May 2019
Honda /Acura have updated their position statement on pre- and post-repair scanning to give more clarification on what is expected for scanning.
-
Restraints Wiring Repairs
Monday, 23 May 2016
Over the past few months, we've been sharing OEM position statements on restraints wiring repairs. Now we're bringing them all together in one place for easy reference.
-
Typical Calibration Requirements For Blind Spot Sensors
Wednesday, 19 October 2016
Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not...
-
Typical Calibration Requirements For Forward Radar Sensors
Wednesday, 12 October 2016
Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not...
-
General Motors Position Statement: Pre- and Post-Repair System Scanning
Friday, 21 October 2016
As the industry continues to ask, are pre- and post-repair scans necessary, General Motors provides their answer.
-
FCA/Stellantis Position Statement: Pre- and Post-Repair System Scanning
Thursday, 9 June 2016
FCA/Stellantis has released a position statement related to pre- and post-repair system scanning.
-
Quickly Identifying Outer Quarter Panels w/Rolled Hem Flanges
Monday, 5 March 2018
The I-CAR best practice article, Recycled Outer Quarter Panels w/Rolled Hem Flanges has gotten a lot of interest from the collision repair industry. It’s important to know which vehicles are...
-
I-CAR Repairers Realm: Controlling Static During Refinishing - Coming Soon
Friday, 19 April 2024
I-CAR is having a discussion on how to control static during refinishing.
-
I-CAR Just In Time: EV Repair Tips
Wednesday, 17 April 2024
Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips...
-
I-CAR RTS App
Monday, 15 April 2024
Looking for another tool for your toolbox? An informational guide at your fingertips? Well, the I-CAR Repairability Technical Support (RTS) app is what you are looking for!
-
Repairer Driven News: ADAS Radar Optimized Paint Color Resources
Friday, 12 April 2024
Changes in advanced driver assistance systems (ADAS) radar technology are introducing new refinishing considerations. Paint film thickness not only may affect the performance of ADAS radars, color...
-
Back-To-Basics: Window Tab Retractor
Thursday, 11 April 2024
Sometimes going back-to-basics can make the difference between a quality repair and a failed repair. Window regulators have evolved over the years, most now using a clip type retaining method. With...
-
High-Voltage Vehicle Paint Booth Quick Reference
Tuesday, 9 April 2024
When refinishing high-voltage (HV) vehicles, it is important to check for OEM paint booth temperature recommendations so that HV components do not get damaged in the heat.
-
Ford On Target 2024: Volume 1
Friday, 5 April 2024
Ford has released the first installment of their On Target publication for 2024.
-
3M Offers SOP And Process Hands-On Training and Skill Development
Thursday, 4 April 2024
The 3M Skills Development Center is a 15,000 sq ft facility where technicians can take a Body Repair Course or Paint Prep and Refinish Course. Both courses are majority hands-on of standard...
-
OEM Linking Pin: Nissan/INFINITI Outer Uniside Sectioning - Cut Line Clarification
Wednesday, 3 April 2024
As part of the I-CAR Repairability Technical Support (RTS) OEM linking pin activity, we are helping to connect the collision repair industry to the vehicle makers. We‘ve had technical inquiries that...
-
I-CAR Repairers Realm: All New RTS App From I-CAR - Now Available
Friday, 29 March 2024
I-CAR had a discussion on the new Repairability Technical Support (RTS) app from I-CAR.
- 2024
- April 2024 (9)
- March 2024 (12)
- February 2024 (12)
- January 2024 (10)
- 2023
- December 2023 (8)
- November 2023 (13)
- October 2023 (11)
- September 2023 (11)
- August 2023 (12)
- July 2023 (9)
- June 2023 (12)
- May 2023 (12)
- April 2023 (11)
- March 2023 (12)
- February 2023 (10)
- January 2023 (11)
- 2022
- December 2022 (11)
- November 2022 (12)
- October 2022 (11)
- September 2022 (13)
- August 2022 (11)
- July 2022 (10)
- June 2022 (13)
- May 2022 (11)
- April 2022 (12)
- March 2022 (10)
- February 2022 (11)
- January 2022 (13)
- 2021
- December 2021 (13)
- November 2021 (12)
- October 2021 (13)
- September 2021 (15)
- August 2021 (12)
- July 2021 (15)
- June 2021 (17)
- May 2021 (14)
- April 2021 (14)
- March 2021 (21)
- February 2021 (15)
- January 2021 (14)
- 2020
- December 2020 (13)
- November 2020 (17)
- October 2020 (12)
- September 2020 (14)
- August 2020 (11)
- July 2020 (18)
- June 2020 (16)
- May 2020 (14)
- April 2020 (20)
- March 2020 (12)
- February 2020 (14)
- January 2020 (14)
- 2019
- December 2019 (13)
- November 2019 (19)
- October 2019 (25)
- September 2019 (20)
- August 2019 (22)
- July 2019 (23)
- June 2019 (21)
- May 2019 (19)
- April 2019 (20)
- March 2019 (21)
- February 2019 (21)
- January 2019 (18)
- 2018
- December 2018 (19)
- November 2018 (19)
- October 2018 (17)
- September 2018 (16)
- August 2018 (21)
- July 2018 (20)
- June 2018 (21)
- May 2018 (17)
- April 2018 (19)
- March 2018 (22)
- February 2018 (16)
- January 2018 (20)
- 2017
- December 2017 (13)
- November 2017 (15)
- October 2017 (19)
- September 2017 (20)
- August 2017 (20)
- July 2017 (18)
- June 2017 (23)
- May 2017 (20)
- April 2017 (14)
- March 2017 (18)
- February 2017 (11)
- January 2017 (13)
- 2016
- December 2016 (9)
- November 2016 (14)
- October 2016 (21)
- September 2016 (11)
- August 2016 (11)
- July 2016 (8)
- June 2016 (13)
- May 2016 (10)
- April 2016 (11)
- March 2016 (12)
- February 2016 (11)
- January 2016 (8)
- 2015
- December 2015 (9)
- November 2015 (8)
- October 2015 (9)
- September 2015 (7)
- August 2015 (11)
- July 2015 (10)
- June 2015 (8)
- May 2015 (8)
- April 2015 (9)
- March 2015 (8)
- February 2015 (9)
- January 2015 (10)
- 2014
- December 2014 (12)
- November 2014 (7)
- October 2014 (11)
- September 2014 (10)
- August 2014 (9)
- July 2014 (12)
- June 2014 (9)
- May 2014 (14)
- April 2014 (9)
- March 2014 (6)
- February 2014 (1)
- January 2014 (27)
